GPRS / WAP settings for China Mobile Incl. i9+++
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Highlight
- Report Inappropriate Content
on 21-09-2009 07:05 PM
Many users need GPRS / WAP settings for their China mobile purchased on ebay or other sources, so I thought I would start a thread here.
To use GPRS / WAP on your china mobile you need just two setting from your service provider:
1) Access Point Name (APN) and
2) I.P. address.
How to manually set up :-
I will use settings for Aircel wap - you can change it with any service provider.
WAP
***First Step***
1) Main Menu --> Select Services (This may be named variously as net, etc.)
2) Select Data Account - Select GPRS
3) Select the First Entry
4) Edit the account name to whatever you would like
5) Edit the APN to: aircelwap (your service provider settings)
6) Username - leave blank
7) Password - leave blank
8) Edit Auth Type - Normal (if needed)
9) Save
Select Back --> Select Back
***Second Step***
Select WAP
1) Select Settings --> Edit Profile
2) Select the first entry --> Edit Profile
3) Edit the name to whatever you would like
4) Edit Homepage to : http://myaircel.com (your service provider setting)
5) Edit Data Account to the Name you established in the First Setp.
6) Edit Connection type to HTTP
7) Change IP Address is 172.17.83.69 (your service provider address) and the port number is 8080
8) Edit Username to - Blank
9) Edit Password t0 - Blank
Select back or done
Select Activate Account
The above settings are for Aircel Pocket Internet. You just need two seeting APN, IP address and homepage to use it for your service provider.
I will give setting for Airtel here:
APN - airtelgprs.com
IP address - 202.056.231.117
Homepage - http://www.google.com
Request other members to provide settings for other service providers. I will keep updating with other service provider settings.
Paresh
GPRS / WAP settings for China Mobile Incl. i9+++
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Highlight
- Report Inappropriate Content
on 25-05-2010 08:44 AM
GPRS / WAP settings for China Mobile Incl. i9+++
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Highlight
- Report Inappropriate Content
on 30-06-2010 06:00 AM
pareshwins
recently i buy lephoe a1 series phone and i couldn't coneet gprs on it can u help me out
i brought aircel sim and itried ur setting which u give on this forum but it not worked pls help me out
thanks
GPRS / WAP settings for China Mobile Incl. i9+++
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Highlight
- Report Inappropriate Content
on 20-07-2010 05:32 PM
my i9(Ag-tel 005) is connecting to gprs but the pages are not displaying it only leads to loss of money can any one help me
GPRS / WAP settings for China Mobile Incl. i9+++
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Highlight
- Report Inappropriate Content
on 25-07-2010 02:38 PM
GPRS / WAP settings for China Mobile Incl. i9+++
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Highlight
- Report Inappropriate Content
on 26-07-2010 04:55 PM
Can anybody help me with my problem? I just bought an Air Phone 1(copy of iphone) and having problem with accessing other websites than the pre-installed homepage(www.yahoo.com) when using WIFI. I have 2GB internal memory and getting the same error messages when trying to access other webpages than yahoo. Getting the error message "Insufficient memory" or "incorrect content format". I cant access ANY page other than yahoo.
GPRS / WAP settings for China Mobile Incl. i9+++
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Highlight
- Report Inappropriate Content
on 02-08-2010 04:06 PM
GPRS / WAP settings for China Mobile Incl. i9+++
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Highlight
- Report Inappropriate Content
on 03-08-2010 12:28 AM
You are blaming us but we had tried 5 times to do pick up from bluedart
whenever bluedart or i call you are not responding the call and then saying your phone is 24 hrs active.
DONT BLAME US,WE ARE ALWAYS THERE IF YOU ARE ANY PROBLEM BUT YOU DONT WANT TO COOPERATE
BUYER SAYS THAT TELL BLUEDART TO GIVE NEW PRODUCT AND AFTER I USE FOR 2-3 DAYS THAN PICK UP OLD.
HOW CAN IT BE POSSIBLE?
ALSO WE HAVENT TOLD ANYWHERE IN OUR DESCRIPTION THAT IT HAS YOUTUBE LIVE STREAMING.WHY YOU ARE TRYING TO BLAME?
HERE IS BLUEDART MAIL FOR ALL AS A PROOF WHERE BUYER SAYS NO PICK UP
-----Original Message-----
From: SOHAN LAL /OPS/CAR CMM/EXEC
Sent: Tuesday, July 27, 2010 12:42 AM
To: TOPAY /CS /DEL NRO/; UMMAT RAJESH/OPS/CAR CNO/SR.EX
Cc: DALJEET S /OPS/CAR CMM/A.MGR; DEEPALI R /CS /BDQ /SR.EX; SOHAN LAL
/OPS/CAR CMM/EXEC
Subject: RE: TOPAY PREALERT : REFERENCEID : 0000127850 DPUDATE :
26-JUL-10
as per the shipper there no pickup.He says deliver new item and after that take old after 3-4 days.
regds...sohan
-----Original Message-----
From: TOPAY /CS /DEL NRO/
Sent: Monday, July 26, 2010 1:17 PM
To: UMMAT RAJESH/OPS/CAR CNO/SR.EX; SOHAN LAL /OPS/CAR CMM/EXEC
Cc: DALJEET S /OPS/CAR CMM/A.MGR; DEEPALI R /CS /BDQ /SR.EX
Subject: FW: TOPAY PREALERT : REFERENCEID : 0000127850 DPUDATE :
26-JUL-10
Arrange the same
Amita Walia│Executive-Customer Services│Blue Dart Express Limited
Executive Customer Services, 04th Floor, Elegance Tower,Plot no 8, Non
Hierarchical Commercial Centre, Jasola, New Delhi-110025
'+ 91 11 66111234 Ext 39525 │ F +91 11 40579999 │* www.bluedart.com
-----Original Message-----
From: caress@bluedart.com [mailto:caress@bluedart.com]
Sent: Monday, July 26, 2010 12:13 PM
To: TOPAY /CS /DEL NRO/
Subject: TOPAY PREALERT : REFERENCEID : 0000127850 DPUDATE : 26-JUL-10
Billing Details
-----------------
Area : BDQ
Customer Code : 046793 : SAMIR VED
Customer Email Id : SAMIR@YAHOO.COM
P/U Location Details
----------------------
Shipper Name : Tejinder pal singh ghuman
Address :
:
5239 ground floor
modern housing complex manimaj
modern housing complex manimaj
160017
:
Pickup Pincode : 160017
Pickup Area : CAR / CMM
Contact Person : Tejinder pal singh ghuman
Contact No : 9781572728
P/U Date : 26-JUL-10
P/U Time : 1300
Closing Time : 1600
Dox/Duts : DUTS
ProdCode : D
Weight :
No Of Shipts : 1
CS Employee :
EmailId : topaydel@bluedart.com
Remarks :
Pickup Registered By : DEEPALI DHAR
Regards
Yogen ved.
GPRS / WAP settings for China Mobile Incl. i9+++
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Highlight
- Report Inappropriate Content
on 09-09-2010 02:16 AM
I have purchased Rocker i9 phone from eBay. I have 2problems with it.
1. It has no imei no. 2. The phone is getting off by itself. I have to take the battery and put it again so that the phone starts.
The 1st problem i have managed to get the IMEI no. fixed but the 2nd problem still exists. Please suggest me on this. The guy from whom i bought the phone is no where replying.
Thanks
Chandra
GPRS / WAP settings for China Mobile Incl. i9+++
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Highlight
- Report Inappropriate Content
on 07-10-2010 12:56 PM
PC/ Laptop Internet Connection through China Mobile
Pls do the following to connect the intenet on your PC/Laptop through your china mobile.
First of all make the necessory settings for internet in your phone. (means go to WAP settings and select the SIM and profile and Data Account through which you want to connet the internet. Your service provider will also give you). Now do the following
1. Down load the drivers for your cell phone. (MT 6225 "mine was MT6235" is available on http://groups.google.co.in/group/bvmdiplomates2000 so download it from there).
2. Connect the usb cable to your PC/Laptop and then connect it to your pnone.
3. During the connection to the phone it will ask for one of three options(COM, web cam, usb mass storage). select 'COM'.
4. Now in the PC the massage will desplayed for installing the driver so double click on that msg and the window will open for installing the driver. so select the path for your driver (select 2k_xp_com for MT6225) and click next. The fdriver will be installed.
5. If you cant do above then there is a other option for installing the driver is go to the properties of My Computer. Then go to the Hardware and then Device Manager. In device manager you will find Ports(COM & LTP). Open it. in that you will find question mark with yellow colour.(if not find then on top click on the serch option symbole) Right click on that yellow question mark and then install the driver same as mentioned in No.4.
6. If the driver will be installed properly then the yellow questione mark will removed automatically and the massage will be displayed on lower right side of your PC that 'your new hardware is installed properly and........'
7. After this chek the COM port number(ie COM 1, COM 2, COM10, etc.) for your phone (TECNO USB) through the Device Manager in your PC.
8. Now in your PC go to 'Control pannel' - 'Phone and modem'. It will ask for your area code. Pls enter your area STD code. Then go to "Modems" - tick on "dont detect my modem; i will select it from list" - select "standerd 19200 bps Modem" with COM port number of your cell and click finish. It will desplayed in modem list. select it and go to properties of your modem and go to Diagnostics and click on query Modem so some msg will be displayed in 'Commands' and 'Responce'. means modem is installed properly. Now click on advance and write in the 'Extra initializing command' as per your network service provider. For Artel Mobile Office write down : AT+CGDCONT=1,"IP","airtelgprs.com","",0,0
For idea
AT+CGDCONT=1,"IP","ideafresh.com","",0,0
*********************// for aircel //****************
put the APN "aircelweb" instead of "airtelgprs.com" and uncheck the proxy.
9. Now Go to Properties of your Internet - then 'connectins'and click on 'Add'- then click on 'Dial up to Private Network' and click next - then input phone No *99# [ for aircel & idea change dialup no. to *99***1# ]
for all and click next - then type dial up connection name whatever you like and then click next. the window will displayed. click on properties of Dial up settings and after that in general select your Modem in 'connect using' and click on 'ok'. Now your connection name will be displayed in the list of connections. set it as default and clik ok and close the window.
10 Now click on 'start menu' then 'Connect To' and then click on your dial up connection name and finally click on 'Dial'. The connection will be established in few seconds and the massage will be displayed '115.2kbps ........'
11. Now enjoy the internet in you PC/Laptop.
GPRS / WAP settings for China Mobile Incl. i9+++
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Highlight
- Report Inappropriate Content
on 08-10-2010 11:33 AM

